|
Post by gusso on Apr 8, 2022 17:21:14 GMT -6
Btw, I keep a piece of labeled tape on that socket (and regular corny, too) to identify it.
|
|
|
Post by Leftympfrmde on Apr 8, 2022 17:45:36 GMT -6
Btw, I keep a piece of labeled tape on that socket (and regular corny, too) to identify it. I've had two sockets at the ready for keg maintenance. Now? It'll be 3.
|
|
|
Post by gusso on Apr 8, 2022 18:15:23 GMT -6
Btw, I keep a piece of labeled tape on that socket (and regular corny, too) to identify it. I've had two sockets at the ready for keg maintenance. Now? It'll be 3. ? How'd you already have2?
|
|
|
Post by Leftympfrmde on Apr 9, 2022 8:25:04 GMT -6
I've had two sockets at the ready for keg maintenance. Now? It'll be 3. ? How'd you already have2? 7/8" ans 3/4" and now, 18mm 🤪
|
|
|
Post by brewbama on Apr 9, 2022 9:14:58 GMT -6
+1. I keep a cpl wrenches, a screw driver, and pliers at hand in the brewery.
Sent from my iPhone using Tapatalk
|
|
|
Post by Leftympfrmde on Apr 9, 2022 16:30:58 GMT -6
+1. I keep a cpl wrenches, a screw driver, and pliers at hand in the brewery. Sent from my iPhone using Tapatalk Same!
|
|
|
Post by gusso on Apr 13, 2022 8:52:06 GMT -6
I just ordered another pressurized fermenter! I got a 6 gallon Torpedo this time.
|
|
|
Post by Ken on Apr 13, 2022 9:23:17 GMT -6
I just ordered another pressurized fermenter! I got a 6 gallon Torpedo this time. I can see it now. Gusso will open a production brewery sometime in the next 12 months. Gusso's Brews & Philly Cheesesteaks The Eagles will be on an endless loop on the flatscreen.
|
|
|
Post by Seven on Apr 13, 2022 9:30:49 GMT -6
I just ordered another pressurized fermenter! I got a 6 gallon Torpedo this time. I can see it now. Gusso will open a production brewery sometime in the next 12 months. Gusso's Brews & Philly Cheesesteaks The Eagles beating the Patriots in SuperBowl LII will be on an endless loop on the flatscreen. FIFY
|
|
|
Post by gusso on Apr 14, 2022 20:01:07 GMT -6
I just ordered another pressurized fermenter! I got a 6 gallon Torpedo this time. Scheduled to be delivered tomorrow - that was fast! Under $130 with tax.
|
|
|
Post by gusso on Apr 16, 2022 16:00:14 GMT -6
|
|
|
Post by gusso on Apr 16, 2022 18:35:29 GMT -6
Delivered
|
|
|
Post by Leftympfrmde on Apr 17, 2022 23:21:41 GMT -6
Have the new keg set up; did a pbw cleaning, and set up the floating dip tube- luckily, I had some stainless washers sitting around for a abandoned project I had in mind, so added that between the float and intake tube. decided to do a trial run with a gallon of sanitizer.
under pressure, and a continuous flow, no disruptions with the the intake floating above the surface level, and left minimal sanitizer behind- tried to measure it, and best guess is about 2 oz.
already decided that I'll brew a smoked helles for its maiden voyage. Just have to find the time to brew!
|
|
|
Post by brewbama on Apr 19, 2022 6:37:33 GMT -6
… Found some work-around. Put a weight between the float and in intake side of the tube, and cut so it fit to have it straight down with no slack. … I’d like to get your take on the ‘fix’ for these. Does it work? I really miss the floating dip tube in the only keg where I don’t have one installed. I don’t mind picking up some stainless fender washers but would like an idea of what size, how many, and where to install them.
|
|
|
Post by gusso on Apr 19, 2022 16:58:08 GMT -6
I added a FLOTit (Trong) with upgraded filter to my new fermentation keg. The FLOTit and Cask Widget Float are all I've really used until getting the ball type with my Fermzilla All-Rounder. I did add a Trong filter to that as well.
|
|